Tag Archives: Floor

Tips on How to Choose Kitchen Floor Tiles

When it comes to flooring your kitchen, making sure you buy the correct type is very important. First of all, there’s a lot more to buying kitchen floors that just how they look. There is also the cost and practicality. You will need to explore all the different options and choose one which looks good, can withstand water and people plus is affordable.

When it comes to kitchen flooring, tiles are amongst the best choice you can make. However in saying that there are different types of floor tile and they are not all created equal. Tiles which are unglazed are much more difficult to keep clean than glazed tiles. Because our lives are packed with so many chores the last thing you want to do is worry over keeping your floor tiles clean.

If you see a wall tile that you really love and think it would look really nice on the floor, whatever you do, resist this urge. Wall tiles are designed for walls; they are light and not thick enough to withstand people walking all over it. Only ever install floor tiles on your floor. They are much thinker and sturdier.

You might think that ceramic floor tiles are a bit cold looking or slippery. Your alternative here then is stone or terracotta. These have a much more natural and homely look compared to ceramic. However the downside is that they are naturally porous and are not perfectly flat so tend to attract dirt more easily. In order to protect your stone or terracotta tiles is to use a sealant or in some cases a wax. This will help keep them in the condition you bought them and reduce your need for constant cleaning.

An item that must also be considered when laying tiles on your kitchen floor is grout. Although buying a dark grout can show up the dirt less, it might look ugly if you choose a light colored tile. By using an epoxy grout you’ll be able to protect against stains and marks, when cleaning you should only use a grout cleaner.

If you are not keen on kitchen tiles then other options available to you are vinyl, linoleum, rubber and even concrete. Just think about how you use your kitchen and the style of your home. If you have a very traditional house then selecting terracotta or ceramic might look best whilst modern homes can get away with experimenting a lot more with flooring choices.

April Kerr often writes articles for home and garden site which also has articles relating to types of ceramic floor tiles and sealling limestone tiles.

Wood Floor Refinishing In Sherman Oaks- For Absolute And Astonishing Look

Wooden floors are the choices of many and have a great tendency to impress all the people so easily. A lot of people at the time of newly construction of building or house or at the time of remodelling of a house or doing any other thing, always consider to go with the best floors, which is something for uplifting the appearance of the place.

Surely, wooden floors can be slightly expensive than others, but talk about its elegant look, classy appearance and unique feel, it is very popular and a lot of people order for such sort of floors to the construction companies. Before installing wooden floors, all you just need to determine various sorts of things, which will make up great decision for you.

Before going up with the same, all you just need to go with the best and reliable construction company los angeles which will be there to provide you complete knowledge about their services offered. Via this, you will easily able to know, what kind of services the best service provider can provide to you, what kind of floors you can expect to have, get in touch with the best concept of installing the wooden floor, sensible prices and various other things are here, which you should know and will provide you so amazing results, without any doubt.

Why people love to have wooden floors so much and which is the best source for installing the same, must know from here and get ready to gain a lot of benefits. Here they are-

-A good quality of wooden floor always lasts forever and it is something will easily catch the attention of all. Not only this, such sort of high quality and classy floors never bother you at all as it requires minimal amount of maintenance and care. However, install the same and enjoy wooden floor which will never fade away.

-Moving with wood floor refinishing in sherman oaks will give you the best suggestions on which kind of floors you can easily expect to have as well as what will suit you up the most. The professional company will offer you many choices of wooden floors, which can be varied in colors, sizes, design, appearance, prices and various other things, thus, use their suggestions and go ahead to make your place superb.

-Doesn’t matter at all, whether you are a residential one or commercial, the best professionals always able to work with any size of work and at the end of work, they just provide you 100 percent satisfaction.

-You might don’t know, but hiring reliable company means you can easily expect to have good quality services and if you get the same, then you can easily expect to have more hygienic, classy, and cost-cutting solution which you can’t expect from any other source. Yes, hire up the same and reduce the cost of carpets, rugs and other items, you generally put on your floors.

Author generally writes about construction company los angeles to spread more knowledge and its working with the world. Must connect with the author and get amazing source.

Wood Floor Restoration from the Experts

The best choice for all kinds of Wood floor restoration and refurbishment needs, Peakflooring is ideal. They are a bona fide contractor that maintains absolute security in the different aspects of flooring. Junkers Approved Bona Fide contractors are always the most reliable for your work. Peak Flooring has earned their expertise by working in a large number of projects over the years. They use different kinds of techniques some of which are tailored to give the individual customers best results.

They use the highest quality seals and lacquers only so you can be sure that your floors will get the best treatment. The Floor sanding machines that they use have the most advanced technology and are of the highest standards. Ordinarily these varieties of machines create a lot of dust in the process. But the machines used by this company have the dust extraction capacity of 99.8% so you can be sure that your home and office will remain free of airborne dust.

Their specialized techniques will surely make your floor as smooth and glossy as seen in the real estate magazines. Since they work on public holidays and weekends too, you can be sure that your work will be completed within the stipulated time. Peak Flooring’s service portfolio includes Sports flooring, court markings, granwood flooring and all kinds of refurbishment.

The procedure that they follow is very compact. The first step is checking for nails and screws. If there are any, they are removed. Then the surface is prepped by sanding it in order to make it smooth. The process can be done using to and fro motion, or it can be done with a 45 degree angle motion depending on the surface. Next comes Edging Sander which comprises of sanding the corners of the room and the places where normal machines cannot reach to get the smooth finish all over.

After the sanding process is completed, the vacuuming and sanding process commences. Even though they use high powered machines, there may be some leftover dust. The vacuuming process makes sure that no particles are left behind. The entire process is completed by coating it with the oil or lacquer of the customer’s choosing. The surface is given minimum three coats. With Peak Flooring you can give your room a new dynamism and beauty. The prices they charge for their services are also extremely affordable. Make your floor brand new with their services.

The author says that Peakflooring specializes in all kinds of Wood floor restoration and Floor sanding.

Which Tiles To Choose For The Walls And Floor Of Your House?

There are several diverse kinds of tiles for you to opt from if you are looking to re-tile the walls or floor in your house. The key to picking the accurate kinds is to become aware of precisely what is offered and what the dissimilarities are between each one of them. Two of the trendiest kinds that people choose nowadays are ceramic as well as porcelain ones; however what are the dissimilarities among each. Here is a deep comparison between the two, so you can make the best informed choice that is suitable for you as well as your home.
The major dissimilarity among these two trendy sorts of tiles is the way in which they are made. Ceramic ones are generally made by means of white or red clay. These are molded into the preferred shape and after that placed in the clay oven. Then they are layered with a shiny finish, which helps lock in any pattern or shade that has been placed on the tile. As these are prepared from a soft clay material, they are normally a lot easier to cut, therefore are perfect if you think you will have to modify the size of it because of irregular lines or tricky stains to be covered.

Porcelain tiles are made with unique dust press techniques from porcelain clay. This method forms a tile, which boasts a smooth, excellent grain surface. The procedure which is utilized to build makes them more anti to water than ceramic tiles. Often, these are offered an extra covering of shiny finish, which intensifies their resilience to a great extent, making them extremely hard to scratch or mark, therefore they are ideal for kitchens as well as floor.
If you choose porcelain tiles, you will notice that there is a more considerable dissimilarity between glazed as well as un-glazed porcelain tiles. Those that are glossy are offered a cover of liquid glass right before they are placed in the clay oven. This covering signifies that your tiles will not show signs of any wear and tear, even after long periods of time. Un-glazed porcelain ones are more exposed, therefore more in danger of wear and tear, but they do look eye-catching, therefore it is just an issue of personal taste. Porcelain tiles, a lot like ceramic ones, can be in different shades; therefore you have additional option than simple white tiles, which for sure appear extremely stylish and trendy, as well.

Well…….If you are in search of the most long-lasting tile for your house, porcelain ones might go well with your preference. On the other hand, ceramic ones are multipurpose, therefore maybe better for those who wish for a softer alternative, which can be cut without any difficulty. Either one you prefer, one thing is sure – both look amazing, and can right away provide any wall or floor a new chic look.
Somany Ceramics is a Manufacturer and distributor of Floor, Wall, Vitrified, Ceramic tiles in India and is also a leading manufacturer and supplier of Imported Tiles.
Article Source:http://www.wikinut.com/choose-tiles-for-floor-and-walls/1nsj9xzy/29c_2bnu/

Know more about Designer tiles, floor tile, Wall tile, Wall claddings, Vitrified tiles manufacturers,Ceramic tiles and Imported tiles.

Find the Best Expert for Wood Floor Sanding London

Flooring has a huge impact on the appearance of your home. A home adorned with lavished furniture and an exquisite paint but having cracked floor and other scratches and stains on floor will not just create bad impression but will drastically affect the overall looks of otherwise beautiful looking home. Floor sanding in London is the best option to regain beauty of your old wooden floor.

The installation of wooden flooring requires huge investment. If you are planning to change your flooring because of few cracks in it, you should think twice. It is better to find out wood floor sanding expert to regain the beauty of floor. Here are the few guidelines to help you in finding the right sanding expert in London:

Give preference to references

Word of mouth is always the best publicity. It is better to ask your neighbors, friends and acquaintances about the floor sanding experts who’ve recently had their floor sanded by such experts. It allows you to have a glimpse at the finishing produced by them before actually hiring them.

Check out the classifieds

Nowadays, most of professional floor sanding service providers advertize their services in leading newspapers. You can easily locate a long list of floor sanders and parquet flooring restoration experts available near your desired area in the classified’s ads sections. Many times such floor sanders advertise special offers to provide you floor sanding in London services at affordable prices.

Online directories

With internet becoming most used source of information, you can find a wide range of floor sanding experts through online directories. These directories displays category wise complete information about the sanders in your desired area. They also easily connect you with the websites of professional wood floor sanding experts to make it instant and easy to locate floor sanders in your locality.

Floor sanding might seem to be easy to pursue task, but it requires lots of attention and expertise to accomplish the desired finishing. It is important to hire skilled and experienced floor sander who possess license and certification for floor sanding.

Floor sanding experts allows you to choose from a wide range of shades varying from dark to light color and from parquet flooring restoration to ordinary floor sanding. These professional companies offer you a wide range of quality services to make a proper refinishing. It is important to choose a floor sander wisely to get best value for the money you spent and enhance the value of your floor.

We offering a Variety of Floor Sanding And Floor Sanding South London It ensure that to get Wonderful and amazing Restoration Design. More Consequences Design Provided by www.floorsandingexperts.co.uk.

Installing A Tile Floor That Won’t Crack

Many buildings in Europe have tile floors that are 1000s of years old that are pristine condition. In the United States, however, tile floor often crack after less than 10 years. What did the ancient Europeans know about tile that we don’t?

The answer is the uncoupling system the Europeans used. The uncoupling system starts with a bottom layer of mortar followed by a thin layer of sand. The tiles are then set into another layer of mortar on top of the sand. The uncoupling system allowed for the tiles to float above the floor so that when the buildings began to move, shift and settle the tiles would be unaffected. Without the uncoupling system, today’s tile floors move when the buildings move. This causes multiple problems including: loosened grout, loosened tiles and in extreme cases the tiles can move, shift and crack, especially in larger floors.

In the past, some people have had pretty good luck by first making sure that the sub-floor was thick enough. They would applying felt paper, wire lath, and a layer of mortar before installing the tile. But that was a lot of extra work, extra materials, and extra thickness of being added to the tile floor. Recently, people have started using a product called Ditra, which applies ancient European concepts using some 21st-century materials.

Before beginning any tiling project, it is important that you start with a sound floor. Adding a membrane under the tile floor will only lengthen the life of your tile floor if the floor is structurally sound. If you notice that there is too much give when you jump up and down on the floor that probably means the floor needs to be strengthened before you begin tiling. Check the frame work below the floor, whenever possible, to make sure the size and spacing of the joists are correct for floor span.

Second, before installing the tile, you will need to roll out and cut pieces of membrane for the whole floor. It’s okay to use small pieces in areas such as thresholds to make the installation easier. If you’re putting down a heat mat for a radiant floor, install it before the membrane. Snap chalklines for each course of tile before it’s installed to help guide you so that you don’t spread more thinset mortar than necessary. For an installation over a wood sub-floor, use a latex-modified thinset that bonds well to the fabric side of the membrane.

When using your trowel, you’ll need to keep the lines going in one direction so that pockets or voids don’t form which can prevent the membrane from bonding properly. Roll out the membrane into the mortar and press it flat. Once in position, use either a 75-lb linoleum roller or a wood float to press the membrane into the mortar, establishing the bond. Make sure to push out any excess thinset otherwise this may make the floor uneven.

Most importantly, you will want to plan your tile layout for best look and least waste. This is best done by selecting the room’s focal point.Remember, once the first tile goes down, there’s no turning back. So, take as much time as you need to get the layout right and always remember, when laying tile, that the first tile determines the position of every tile in the floor.

Looking to find the best deal on tile flooring, then visit www.carpetone.com to find the best advice on tile installation for you.

Shopping for a Wood Floor in Winston Salem

Hardwood Flooring in Winston Salem
Hardwood flooring is a good choice for North Carolina homeowners as it mirrors the state’s many oak and other hardwood forests. Hardwood also adds an elegance and formality to any room. Pet owners and families with small children will find hardwood particularly easy to maintain, and those with allergies will find it relatively dust-free when compared to carpet flooring.

Hardwood flooring in Winston Salem is available pre-finished or unfinished to stain on-site to match your woodwork or cabinetry. Popular woods for wood floors in Winston Salem include hickory, oak, maple, pine, and cherry. Hardwood planks for flooring are generally 3/4″ thick and are available in widths ranging from 2 1/2″ to 5″.

Most hardwood flooring retailers include installation in the price of the planks. Installation may be with glue or with tacks, depending on the moisture in the room and the condition of the room’s sub-flooring.

Laminate Flooring in Winston Salem
Laminate flooring is a good choice for rooms and areas that get a lot of traffic and spills, such as kitchens or family rooms. Laminate flooring looks like real wood, but it is much more affordable, scratch-resistant, and durable than traditional hardwood planks. This type of flooring is created by fusing several layers of board together to form one piece of laminate flooring. Winston Salem homeowners can choose from a variety of faux grain markings that simulate the grain in real woods, like cherry, oak, and maple. Such flooring comes in tiles or board-like lengths of wood. You can also get laminate that resembles stone or ceramic tile. Laminate flooring boards are usually designed to lock together and are installed with glue to hold them in place.

Other Choices for a Wood Floor in Winston Salem
In addition to the traditional hardwood boards, homeowners shopping for wood flooring in Winston Salem might consider parquet flooring, squares of wood fitted into a decorative design that are usually less expensive than hardwood planks. For those looking for a green option, consider wood-like bamboo or cork flooring.

Wood and laminate flooring in Winston Salem is available at a number of retailers, including large home improvement stores, independently owned floor covering stores, and online retailers. Most stores offer delivery and installation and many offer financing for large purchases.

The Basics on How to Lay Ceramic Floor Tile the Right Way

Raring to start working on your own ceramic floor tile project? Get ready to learn the basics of how to lay ceramic floor tile right here and make that beautiful ceramic tile floor that you and your family have always wanted! So, get your tiling tools ready, put on your safety goggles and let’s do some tiling!

The tiling starts with the subfloor. As you learn more about how to lay ceramic floor tile, you will find out about the three general types of floors that tile installers may often work with. Such information will help you alot along the way.

There are three types of subfloors: Vinyl, plywood, and the concrete floors. Installing ceramic tile directly to vinyl or linoleum floors (or subfloor surfaces) should be avoided at all cost. Your vinyl or linoleum flooring may contain asbestos fibers and should be tested first before you try removing it. If your vinyl floor covering does not contain asbestos fibers, a general recommendation on how to lay ceramic floor tile is to rough-sand, or scarify, the vinyl floor surface to provide your tiling mortar a better grip. Use a latex modified thinset mortar to install your ceramic tiles over your vinyl subfloor.

Working over plywood subfloors can be very tricky, as well. Like vinyl floor surfaces, it is not advisable to install your ceramic tiles directly on to your plywood floor surface. Plywood flooring usually has a smooth surface, and easily warps when exposed to heat or moisture. Be sure that the wood is at least 1 and 1/8 inches thick and is reinforced and supported by an equally strong underlayment. Otherwise, your ceramic tiles will dislodge easily, or worse, break and need replacing. Plywood panel edges must be installed about one-fourth of an inch away from perimeter walls and door jambs, and fixtures and cabinetry. These are expansion gaps and should not be bridged with tiling mortar. To prevent moisture from damaging the plywood subfloor, use a waterproofing sealant or caulk over your plywood subsurface.

The easiest subfloors to work on are concrete subfloors. But before you start tiling over the subfloor surface, it must be cleaned thoroughly. Paint, adhesives, fillers or levelers, sealers, and chemically treated cement substrates are unsuitable surfaces fpr ceramic tile installations. Remove these by using non-chemical methods. For dust and other debris, sweep and then mop your concrete subfloor surface using only clean water. Allow the surface completely before you start working on it. Generally, smooth concrete surfaces are difficult to work with as the tiling mortar may not grip and hold. Consequently, your ceramic floor tiles may be in danger in dislodging. Smooth concrete surfaces must be rough sanded, scarified, or etched to allow the tiling mortar some grip.

Make sure there are no cracks and debris before you start tiling. Repair as many of the cracks as you can. If you see cracks that are too large to repair, replace the floor section where they are found with new concrete. Concrete may need to set (or dry) for at least twenty-four hours before you can start tiling over it. Lastly, get out your carpenter’s level and check for any dips or humps on the concrete subfloor surface. If you find any, you may use a cement-based floor level to fill in the dips and smoothen over the humps. This will help to keep your finished ceramic tile floor level and minimize dislodging, or tile breakage.

Let it dry or set properly. This is the key step you need to keep in mind about how to lay ceramic floor tile flooring. There are three setting periods: The first is right after you have placed your ceramic tiles with thin set mortar and bonded them to your subfloor. The second is after after putting in your tiling grout (before putting on the sealant). These setting periods last overnight, at the very least, to twenty-four hours, at the most. Your sealant has dried, you are done!

When you work on your own ceramic tile project, always remember how to lay ceramic floor tile properly by knowing how to work with your subfloor surfaces. Learning how to lay ceramic floor tile is also both a great way both to learn a new hobby, and a home improvement skill. Just remember to keep a safe working environment, not to rush things (especially during setting periods), and try to work with at buddy. Better yet, get your friends over and help.

Know how to lay ceramic floor tile on your bathroom or kitchen. Find your ceramic tile installation instructions online.

Is Underfloor Heating Difficult to Install Under a Wood Floor?

Thermatec electric under-floor heating system is suitable for most types of wooden flooring.

Normal methods of installing electric under floor heating systems in rooms with wooden or laminate flooring involved using cable systems covered with difficult to use and time consuming liquid leveling compounds. These tend to be messy and extend the installation time and costs because of drying and curing times. They are also far less efficient than Thermatec as they need to be run at a far higher temperature.

Flexible carbon heating film is the ideal solution for providing an economic electric under floor heating solution for a variety of floor coverings. Flexible carbon heating film is ultra thin, strong, and is a completely dry lay system for heating under laminate or timber floating wood flooring.

Flexible electric carbon heating film can be supplied made to measure to fit your room exactly. Three different widths are used (400mm, 530mm and 1003mm), and the layout is designed using C.A.D. to ensure every part of the floor area is covered. All the electrical connections are made at the factory so that the heating mat can be laid, and the wood floor fitted long in advance of the electrician providing the 230V mains connection. This makes a considerable saving in time and money. It also means you do not have to invest in crimps, presses or heat shrink tape to complete the installation.

Installation of carbon heating film requires no previous experience. Installation is completely dry and is a simple unrolling process. It can be laid over most concrete or timber sub-floors when used in conjunction with the correct Depron thermal insulation.

Flexible carbon heating element is less than 1mm thickness Even with the recommended floor insulation layer of closed cell polystyrene the floor build-up is only 6.5mm. This avoids potential problems with skirting boards and door thresholds.

Carbon heating elements are ultra reliable, safe and robust. without any moving parts,}}} they are completely maintenance free. Brands of carbon heating film like Ecofilm from Flexel International are fully approved to the relevant electrical safety standard IEC60335-2-96 and comply with the 17th Edition electrical wiring regulations. Ecofilm and Thermatec heating elements come with a 10-year guarantee.

The heating film can be used as an effective direct acting radiant heating system. It can be used as a substitute for traditional convector radiators by providing primary heat or just be used to warm a cool floor surface and provide background heat.

Flexel Carbon Heating Element has become a firm favorite with installers and users because it is simple and economic to install and efficiently creates gentle under-foot warmth that heats the entire room. This means leaving no overheated or cold spots.

Benefits include clean balanced heat distribution at the lowest possible temperature, resulting in high user comfort levels and improved economy. The heating is safe beneath any type of wood floor its radiated heat provides overall warmth and comfort without the usual dust carrying convective air currents of conventional radiator systems.

This form of heating is easily controlled by room thermostats and is particularly suited to new build, extensions, hard-to-heat areas, conservatories, hallways, kitchens and bedrooms. It becomes invaluable in many other locations where the absence of radiators is a distinct space-saving advantage.

Alan Green is the installation manager of Birbek

Learning How to Lay Ceramic Floor Tile the Right Way

Raring to start working on your own ceramic floor tile project? Get ready to learn the basics of how to lay ceramic floor tile right here and make that beautiful ceramic tile floor that you and your family have always wanted! So, get your tiling tools ready, put on your safety goggles and let’s do some tiling!

Most tiling jobs start with a well-prepared subfloor. As you learn more about how to lay ceramic floor tile, you will find out about the three general types of floors that tile installers may often work with. Such information will help you alot along the way.

There are three types of subfloors: Vinyl, plywood, and the concrete floors. Installing ceramic tile directly to vinyl or linoleum floors (or subfloor surfaces) should be avoided at all cost. Your vinyl or linoleum flooring may contain asbestos fibers and should be tested first before you try removing it. If your vinyl floor covering does not contain asbestos fibers, a general recommendation on how to lay ceramic floor tile is to rough-sand, or scarify, the vinyl floor surface to provide your tiling mortar a better grip. Use a latex modified thinset mortar to install your ceramic tiles over your vinyl subfloor.

Plywood subfloors can be just as tricky and difficult. Like vinyl floor surfaces, it is not advisable to install your ceramic tiles directly on to your plywood floor surface. Plywood flooring usually has a smooth surface, and easily warps when exposed to heat or moisture. Be sure that the wood is at least 1 and 1/8 inches thick and is reinforced and supported by an equally strong underlayment. Otherwise, your ceramic tiles will dislodge easily, or worse, break and need replacing. Plywood panel edges must be installed about one-fourth of an inch away from perimeter walls and door jambs, and fixtures and cabinetry. These are expansion gaps and should not be bridged with tiling mortar. To prevent moisture from damaging the plywood subfloor, use a waterproofing sealant or caulk over your plywood subsurface.

The easiest subfloors to work on are concrete subfloors. But before you start tiling over the subfloor surface, it must be cleaned thoroughly. Paint, adhesives, fillers or levelers, sealers, and chemically treated cement substrates are unsuitable surfaces fpr ceramic tile installations. Remove these by using non-chemical methods. For dust and other debris, sweep and then mop your concrete subfloor surface using only clean water. Allow the surface completely before you start working on it. Generally, smooth concrete surfaces are difficult to work with as the tiling mortar may not grip and hold. Consequently, your ceramic floor tiles may be in danger in dislodging. Smooth concrete surfaces must be rough sanded, scarified, or etched to allow the tiling mortar some grip.

Another important aspect about how to lay ceramic floor tile is to always check for cracks and debris. Repair as many of the cracks as you can. If you see cracks that are too large to repair, replace the floor section where they are found with new concrete. Concrete may need to set (or dry) for at least twenty-four hours before you can start tiling over it. Lastly, get out your carpenter’s level and check for any dips or humps on the concrete subfloor surface. If you find any, you may use a cement-based floor level to fill in the dips and smoothen over the humps. This will help to keep your finished ceramic tile floor level and minimize dislodging, or tile breakage.

Setting (drying) periods are key steps you need to keep in mind about how to lay ceramic floor tile flooring. There are three setting periods: The first is right after you have placed your ceramic tiles with thin set mortar and bonded them to your subfloor. The second is after after putting in your tiling grout (before putting on the sealant). These setting periods last overnight, at the very least, to twenty-four hours, at the most. Your sealant has dried, you are done!

When you working on your own ceramic tile project, always remember how to lay ceramic floor tile properly by knowing how to work with your subfloor surfaces. Learning how to lay ceramic floor tile is also both a great way both to learn a new hobby, and a home improvement skill. Just remember to keep a safe working environment, not to rush things (especially during setting periods), and try to work with at buddy. Better yet, get your friends over and help.

Know how to lay ceramic floor tile in your home. Find your ceramic tile installation instructions online.